Template · Datasheet · Manufacturing and B2B
Technical datasheet template: specifications engineers trust
A technical datasheet states what an industrial product is and how it performs, in figures an engineer can design with. It needs the product description, typical applications, and properties with units and test methods. Add dimensions and tolerances, operating limits, storage and handling, compliance statements, packaging, and a revision number with date.
| Document | Datasheet |
|---|---|
| Industry | Manufacturing and B2B |
| Sections | 10 |
| Length | 2 to 4 pages, A4, PDF, one datasheet per grade or model |
| Word file | technical-datasheet-template.docx, headings and a placeholder line for each section |
Technical datasheet
- Product identification
- Applications
- Properties
- Dimensions and tolerances
- Operating limits
- Instructions for use
- Storage and handling
- Compliance
- Packaging and ordering
- Disclaimer and revision
The sections, in order
- 01
Product identification
Product name, grade or model, product code and a one-sentence description of what it is. Add the manufacturer’s name and the datasheet number.
Sample EP-440: two-part epoxy adhesive for bonding metals. Datasheet TDS-440.
- 02
Applications
The uses the product is designed for and the substrates or systems it works with, plus uses it is not suitable for. This guides selection and limits liability.
Sample Bonding steel and aluminium in machinery assembly. Not for continuous immersion in water.
- 03
Properties
A table of physical, mechanical, electrical or chemical properties with value, unit and test method or standard. State whether values are typical or guaranteed minimums.
Sample Lap shear strength 24 MPa (typical), tested to the standard lap shear method at 23 degrees
- 04
Dimensions and tolerances
For components, a drawing with dimensions, tolerances, weight and material. For materials, the forms supplied: sheet sizes, viscosities, pack sizes.
Sample Supplied in 50 ml and 400 ml dual cartridges, mix ratio 2:1 by volume
- 05
Operating limits
The range within which the product performs as stated: temperature, pressure, load, speed, chemical exposure. Engineers design to these limits, so be conservative.
Sample Service temperature minus 40 to 120 degrees
- 06
Instructions for use
Surface preparation, mixing or installation steps, cure or commissioning times and common errors to avoid. Keep to numbered steps that a technician can follow at the bench.
Sample Degrease and abrade surfaces. Working time 20 minutes. Full cure in 24 hours at 23 degrees.
- 07
Storage and handling
Storage conditions, shelf life, handling precautions and a pointer to the safety data sheet. Hazard details belong in that separate document.
Sample Store between 8 and 25 degrees. Shelf life 18 months unopened. See the safety data sheet.
- 08
Compliance
Statements of conformity with the standards and substance regulations relevant to your markets, with certificate numbers. Check current requirements for each market before stating compliance.
Sample Complies with the restricted substances rules that apply in our main markets; declaration available
- 09
Packaging and ordering
Pack sizes, units per carton, order codes and minimum order quantities. Purchasing departments copy these straight into purchase orders, so check every code.
Sample Code 440-50: carton of 12 cartridges of 50 ml
- 10
Disclaimer and revision
A note that users must test suitability for their own application, the revision number, issue date and what changed. Withdraw superseded versions from your website.
Sample Revision 5, November 2026: cure time updated. Supersedes revision 4.
Tips
- Name the test method beside every value, or the value cannot be compared.
- State whether figures are typical values or guaranteed specifications.
- Keep a change log, so customers know what moved between revisions.
Mistakes to avoid
- Publishing the best value ever measured as the typical value.
- Mixing metric and imperial units within one table.
Make this datasheet in your brand
Wonib makes datasheets as Word files and print-ready PDFs in your company’s colours and typefaces, so every grade in the range shares the same table layout.
More manufacturing and B2B templates
- Manufacturing company profile templateCompany profile→
- Industrial product catalogue templateProduct catalogue→
- Manufacturing brochure templateBrochure→
- Manufacturing case study templateCase study→
- Manufacturing proposal templateProposal→
- B2B sales deck templateSales deck→
- Trade show invitation templateEvent invitation→
- Manufacturing press release templatePress release→
- Distributor price list templatePrice list or menu→
- Capability statement templateOne-pager→
- Sustainability report templateAnnual or impact report→
Datasheet templates for other industries
See also
- All templatesBy industry and by kind of document→
- Wonib for manufacturers and B2B companiesWhat Wonib makes for this industry→
- Documents for manufacturers and B2B companiesA worked example, with a checklist→
- The general datasheet templateThe same document for any business→
- DocumentsThe Wonib tool that makes it→
Last updated