EN
Start free
Start free

Template · Case study · Manufacturing and B2B

Manufacturing case study template: a problem solved

A manufacturing case study shows how you solved a customer’s production or engineering problem. It should describe the customer and application, the problem and constraints, and what you proposed and why. Add how the solution was validated, results in measurable terms such as cost, defects or lead time, and how the relationship developed.

Last updated

At a glance
DocumentCase study
IndustryManufacturing and B2B
Sections8
Length2 pages, A4, with one photograph of the part and one chart
Word filemanufacturing-case-study-template.docx, headings and a placeholder line for each section

Manufacturing case study

  1. Title and summary
  2. Customer and application
  3. The problem
  4. Our proposal
  5. Validation
  6. Results
  7. Customer comment
  8. What happened next
Preview: the 8 sections, in the order the reader meets them.

The sections, in order

  1. 01

    Title and summary

    A title with the result and the application, then three bullet points: problem, solution, outcome. Engineers scan dozens of these, so the summary must stand alone.

    Sample Cutting leak failures on a hydraulic valve body from 2.1% to 0.2%

  2. 02

    Customer and application

    The customer’s industry, what the part or system does and its operating conditions. Name the customer only with written permission. Otherwise describe them.

    Sample A maker of mobile hydraulic equipment; valve body working at 250 bar

  3. 03

    The problem

    What was failing or costing too much, with figures: reject rates, downtime, lead time, cost per part. Include the constraints such as approved materials or interface dimensions.

    Sample Porosity in cast bodies caused 2.1% of units to fail leak testing after machining.

  4. 04

    Our proposal

    The options you evaluated and the one recommended, with the engineering reasoning: a change of process, material, design or tooling. Say what you ruled out and why.

    Sample We proposed machining from forged bar, with a redesigned port layout to save material.

  5. 05

    Validation

    How the solution was proven before production: samples, test methods, trial batch size, customer approvals. This section is what convinces another engineer.

    Sample 200 trial parts pressure-tested at 375 bar with no failures; approved after a 1,000-unit pilot

  6. 06

    Results

    Before-and-after figures over a stated period, covering quality, cost, delivery or weight. Give the customer’s own measurement where possible, and say who recorded it.

    Sample Leak failures fell to 0.2% over 14 months; total cost per good part down 6%

  7. 07

    Customer comment

    One or two sentences from the customer’s engineer or buyer, approved in writing, on what changed for them. A practical remark is worth more than praise.

    Sample “We stopped testing every unit twice,” said the customer’s quality manager.

  8. 08

    What happened next

    Follow-on parts, volume growth or supply agreements, and an invitation to discuss a similar problem with a named engineer. Give that engineer’s direct email.

    Sample The customer has since moved four more valve bodies to the same process.

Tips

  • Agree with the customer which figures may be published before you write.
  • Include the test method and sample size behind every result.
  • Add a photograph or section drawing of the actual part.

Mistakes to avoid

  • Describing your machines at length and the customer’s problem in one line.
  • Publishing a customer’s drawing or part number without permission.

Make this case study in your brand

Wonib writes case studies in your company’s voice and makes them as Word files and print-ready PDFs in your brand, ready to send by email or share as a view link.

Last updated

Start free with 1,000 credits

No card needed. Sign up with Google or your email, confirm it, and make your first piece in minutes.

Continue with Google

or

Already have an account? Sign in