What is bleed?
Bleed is the extra band of background colour or image that extends past the edge where a printed page will be trimmed. It is cut off after printing, and it prevents thin white strips appearing at the edges of the finished piece.
Last updated
In more detail
Printers cut large stacks of paper at once, and the blade can land a fraction off the intended line. If the artwork stops exactly at the page edge, that small shift shows as a white sliver. Bleed gives the blade room for error. To add it, extend every background, photo or colour block that touches the edge beyond the trim line, then export the PDF with bleed and crop marks switched on. In metric countries bleed is generally between 2 mm and 5 mm on each side, and in the imperial system an eighth of an inch is usual, but your printer's specification is the one to follow. The common mistake is setting up the document at the finished size with no bleed and trying to add it at the end, which forces you to stretch or crop images. Another is placing important text in the bleed area, where it will be cut away.
Source
The facts that can change were checked against en.wikipedia.org/wiki/Bleed_(printing) (opens in a new tab) in November 2026.
Related terms
- Crop marksCrop marks, also called trim marks, are short, thin lines printed at the corners of a sheet to show where it should be cut to its finished size.→
- Safe zoneA safe zone is the inner area of a design where important text and logos are kept so they cannot be trimmed off in print or hidden by buttons and interface elements on a screen.→
- Print-ready PDFA print-ready PDF is a PDF file prepared so a commercial printer can print it without changes: correct page size, bleed and crop marks, fonts embedded, images at print resolution, and colours set for ink.→
More in Design and print
Do it with Wonib
Put the words into practice
Wonib learns your brand once, then makes the posts, pictures, copy, decks and documents in it, checked against the brand before you see them. Start free with 1,000 credits, no card needed.
Last updated